Infortrend S12F-G1842 - Power Off Procedure

EonStor / EonStor DS S12/S16/S24 Series
137
Power Off Procedure
If you wish to power down the system, please follow these steps:
NOTE
If you wish to power down the system, please ensure that no time-consuming
pro generate Logical ” or a “Media Scan,” are taking cesses, like “Re Drive Parity
place.
1 I/O access to the system
Close your applications running on the host computers to stop all I/O access to
2 e
Dirty LED (refe
. Stop
the system.
. Flush the cach
Locate the C_ r to Controller LED for RAID Models
) on the
controller module to check if there is still cached data in the DRAM (if the LED is
lid up in amber).
3 wn Controller ed data (using the
LCD panel
. Use the Shutdo function to flush all cach
, refer to the illustration below). This prepares the RAID system to be
safely powered down.
RAID model No.
Ready
Ent
View and Ed
Mute Beeper
it
Lo
gical Drives
Ent
System
Shutdown This
Controller
F
unctions
Shutdown This
Controller
Ent
Shutdown C
is Busy
ontroller
Shutdo
Reset C
wn complete
tlr
Ent
Confirm
Ent
Legend
Ent: Press the Enter (Ent) button.
Ent: Press and hold the Enter (Ent) button for 2 seconds.
---->: Press the up and down arrow to scroll to the menu you are after.
120