EonStor / EonStor DS S12/S16/S24 Series
139
LCD Panel LED Definitions
1
2
3
Name Color Status
1. PWR (Power) Blue
Blue indicates that power has been turned on
and the system status is normal.
OFF indicates that no power is supplied to the
system or the RAID system has failed.
Flashing white indicates that there is active
host/drive channels.
traffic on the host/drive channels.
OFF indicates that there is no activity on the
2. BUSY
White
3. ATTEN
(Attention)
Red
Red indicates that a component failure/ status
event has occurred.
OFF indicates that the system and all its
components are in proper operation status.
NOTE
During the power-on process, the ATTEN LED will light up steadily. Once the
system successfully boots up with no faults, the ATTEN LED will turn off.
124
To Next Page
Loading...
