Infortrend S12F-G1842 - RAID Configurations for RAID Models

EonStor / EonStor DS S12/S16/S24 Series
172
169
RAID Configurations for RAID Models
RAID Levels and non-RAID disk spanning 0, 1(0 + 1), 3, 5, 6, 10, 30, 50, 60,
Cache Mode gured and cannot be changed All drive channels are pre-confi
Cache Memory Write-through, write-back, and adaptive write policy
Number of LUNs
Pre-installed DDR-II module with ECC, registered; in one DIMM
socket
Multiple Target IDs/Host
tal of 1024 on all host channels
Channel
Up to 32 per host ID, for a to
Aliases for Target IDs Yes
Firmware on Flash Memory Yes
Host Channel Chip
PMC chipsets
Controllers
DIMM Slot One or two DRAM module slot(s)
Chipset ASIC400 / ASIC667 64-bit chipset / Intel chipset
Hardware XOR Yes
Real-time Clock ng For event messages with time record and task scheduli
Configuration
rough the
lished network connection
ernet
Text-based firmware-embedded utility over RS-232C th
serial cable
Telnet via an estab
LCD keypad panel
The SANWatch Manager program using in-band or Eth
connection
Performance Monitoring Yes
Remote Control and
Monitoring
Yes
Event Broadcast/Alert Yes, via Java-based SANWatch Manager
Event Notification Yes, via the SANWatch manager
Hardware Connection
f-band via In-band over Fibre, SAS, or other host link types, out-o
Ethernet or RS-232C
Configuration on Disk
Configuration data stored on disks so that logical drive assemblies
replacement. exist after controller
Failure Indicator
Faults are indicated via alarm, module LED indicators, LCD panel,
rminal emulation. SANWatch Manager, or te