EonStor / EonStor DS S12/S16/S24 Series
73
Chassis Ear
Each chassis ear features a finger grip and two holes for securing chassis to the front
rack posts. In JBOD models, an LED panel (see the previous sections for details) is
mounted on the left chassis ear. A plastic housing conceals the chassis ear.
To access the finger grips, flip open the panel. You may then grasp the finger grip for
retrieving a chassis out of a rackmount rack.
NOTE
The chassis ears can not support the weight of the system. Do not use these finger
grips when re-locating the system.
34
To Next Page
Loading...
