Infortrend S12F-G1842 - Installing the Hard Drive Tray into the Enclosure

EonStor / EonStor DS S12/S16/S24 Series
97
Installing the Hard Drive Tray into the Enclosure
Once the hard drives have been installed in the drive trays, install the drive trays into
the system.
WARNING
Each drive bay must be populated with a tray even if it does not contain a hard drive.
With a bay empty, ventilation will be disrupted and the system will overheat.
With the hard drive tray bezel opened, align and insert the tray into the enclosure.
Once fully inserted, close the tray and use a small-size flat blade screwdriver to turn
the bezel lock from unlock to the lock position.
62