Infoscan FV10X Series User Manual

User & Development Manual
FV10X (V2.0) Series
Industrial Fixed-mount Barcode Scanner
www.infoscan-cn.com
Ver:20240315
Nanjing Bilin Intelligent Identification Technology Co., Ltd.

Infoscan FV10X Series Specifications

General

Scanning Technology	Laser
Operating Temperature	0°C to 50°C (32°F to 122°F)
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Scan Rate	100 scans per second
Interface	USB, RS-232, Keyboard Wedge
Drop Specification	1.5 m (4.9 ft) to concrete
Supported Barcodes	1D barcodes
Operating Humidity	5% to 95% (non-condensing)
Humidity	5% to 95% (non-condensing)

Summary

2 Connection and Wiring

2.1 Serial Port Communication Cable Connection

Explains how to connect the serial port communication cable to the scanner host and the power supply.

2.2 Ethernet Communication Cable Connection

Details the procedure for connecting the Ethernet communication cable between the scanner and the host device.

2.3 I/O Terminal Wiring

Provides a detailed guide on wiring the I/O terminals for external signal connections and device control.

2.4 Wiring According to Purpose

Demonstrates various wiring configurations for I/O terminals based on specific purposes like power supply and sensor triggering.

3 Installation and Angle Adjustment

3.5 Reading Range Data Sheet

Presents data sheets detailing typical barcode reading distances and visual fields for different FV10X models.

4 Connecting FV10X by Configuring Software 'infostepper'

4.2 Connecting Way of infostepper

Details the procedures for connecting the FV10X scanner to the PC via RS232 serial port or Ethernet TCP/IP.

5 Quick Set FV105

6 Set FV10X in Detail by Configuring Software 'infostepper'

6.1 How to Check the Image

Explains how to use the 'infostepper' software to capture and view images from the scanner for setup.

6.2 How to Set Focusing to Make the Image Clear

Guides on adjusting focus settings in 'infostepper' for optimal image clarity, covering both FV105 and FV104.

6.3 How to Set Image Parameters

Details how to adjust parameters like lighting intensity, exposure time, and gain for better image acquisition.

6.4 How to Set Up Serial Port Connections According to Needs

Explains how to configure serial port communication settings like baud rate, parity, and data bits using 'infostepper'.

6.5 How to Set Up Ethernet Connection According to Needs

Guides on setting up Ethernet connection parameters such as IP address, subnet mask, and TCP port number.

6.6 Output Signal Level and Continuous Pulse Width

6.9 Trigger Command and Cancel Command

6.12 Barcode Filtering Criteria

6.14 High-speed Dynamic Reading in Enhanced Mode

6.15 Continuous Triggering Mode Filtering

6.16 Automatic Parameter Adjustment Filtering

6.17 Code Symbology Filtering Criteria

6.20 Saving and Opening Configuration Files

6.23 Automatic Parameter Tuning

Guides on using the automatic parameter tuning feature in 'infostepper' to optimize image acquisition.

7 Settings for Special Applications

7.1 Multi-barcode Mode and Reading Rules

Explains how to enable multi-barcode mode and configure rules for intermessage and end characters.

7.2 Multiple Barcode Selection, Positioning, and Sorting

Guides on setting up rules for selecting, positioning, and sorting multiple barcodes based on area and sequence.

7.3 Prefix or Suffix of Barcode Content

7.4 Setting IO Logic

10 Programming Guidance (C# Code Example)

10.1 Serial Port Programming

Provides C# code examples and guidance for establishing serial port connections and handling data.

10.2 TCP Communication Through Network Port

Offers C# code examples and guidance for establishing TCP/IP connections and managing data transfer.