Aux mode
Enjoy music on other devices by plugging in a 3.5mm audio cable
caution:
1. Using a 3.5mm audio cable will automatically turn off Bluetooth
2. Only the ANC function can be used normally
Reset
If you experience any connectivity issues or functional issues, you may
need to reset the headphone.
Step1-Keep the headset turned on
Step2-Long press the power button + volume up button for 5
seconds,Purple light flashes twice
Step3-The headset is turned off and reset
Step4-Press and hold the power button for 5 seconds, the red and blue
lights flash alternately to enter pairing mode
To Next Page
Loading...