5. Fixing of the base
In some scenes, we want to fix the base and the DX8000 to the table.
The fixing structure is not standard configuration .We need to buy it from the agent.
Installation procedures as below:
First, fix the space block on the table with screws.
Second, fix the Base Fixing structure on the space block with three screws.
Third, put the base on the structure to lock it.
Fourth, fix the Base Fixing structure on the base with three screws.
Fifth, change the battery cover of DX8000 and put DX8000 on the base to lock it.
Step1
Step3 Step2
4.8.2 Save the setting of base
Step1
Step3 Step2
4.8.3 Load the setting of base
14
AXIUM DX8000-BASE-W1
07/25
Copyright© 2023 Ingenico –
Banks and Acquirers International Holding SAS
All rights reserved
To Next Page
Loading...