Ingenico AXIUM DX8000 - Page 2

DIV434837A rev3
INSTALLING THE TERMINAL
Power the
terminal on by
pressing the
power key for 3 to
4 seconds. From
the initial power
on screen swipe
up, then tap the
NER PAY icon.
Select Open
settings.
The terminal will
scan for local
available networks
and provide a list
to select from.
Tap the Wi-Fi
network option
that the terminal
is to be
connected to.
Enter the relevant
password of the
network, then select
CONNECT
A successful
connection is
indicated with the
icon turning green.
Select DONE, the
terminal will return
to the initial
installation screen
Select NEXT.
The terminal will
connect to the
configuration
system. Please
wait will be
displayed during
this phase.
Enter the merchant
number you have
been provided with
then select
CONFIRM
You will be
prompted to enter
a supervisor code.
Enter a supervisor
code of your
choice.
Select then
select CONFIRM
Confirm the
supervisor code by
re-entering it, then
select CONFIRM.
The application is
now configured
and will close. To
start using the
terminal for
transactions tap
the NER PAY icon
to re-open the
application.