4.3 Installing modules
4.3.1 SAM1/SAM2/SIM1/SIM2
WARNING
Switch off the terminal before opening the battery door.
The SAM/SIM connectors are located inside the terminal, in a closed
compartment.
SAM1, SAM2 and SIM1, SIM2 are identified by the engraved marks on
the lower housing.
Please remove the protective film
before usage.
4.2 Screen Protective film
Turn the terminal and remove
the battery door.
13
AXIUM DX8000
07/11
Copyright© 2023 Ingenico –
Banks and Acquirers International Holding SAS
All rights reserved
To Next Page
Loading...
