4
Notes about the unit
Note! Please always keep the unit turned on so that the latest configuration parameters can be loaded.
Function Description Buttons
Setup > password
is requested
Call up the main menu with the <F> button. Select <5> for
the Setup function. The following terminal-specific functions
can be carried out. It is possible to reach this menu item only
with the terminal password.
<F> <5>
<Password>
Configuration The terminal retrieves the latest configuration parameters. <F> <5> <1>
Initialisation Individual or all card issuers are reinitialised. <F> <5> <2>
Update application The terminal loads the latest version of the software.
Caution! Downloading the software can take several minutes.
Never pull out the plug.
<F> <5> <3>
Terminal reset This function is available only to service technicians and is
protected with a special password.
<F> <5> <4>
Info The terminal ID and current version of the software are
displayed.
<F> <5> <5>
Print configuration The current configuration is printed out.
Note: This detailed printout requires a good deal of paper.
<F> <5> <6>
Print HW info This function is available only to service technicians and is
protected with a special password.
<F> <5> <8>
Test Connection Test <F> <5> <9>
Changing paper roll
1 2 3 4
110.0185.02 INT_EN/09.2014
Your personal contact: www.six-payment-services.com/contact
SIX Payment Services Ltd
Hardturmstrasse 201
8005 Zurich
Switzerland
SIX Payment Services (Europe) S.A.
10, rue Gabriel Lippmann
5365 Munsbach
Luxembourg
To Previous Page
Loading...
