Payment Terminals | Page 37 of 54
11.2 X-Total
X-total is a report that shows the accumulated sales performed on the terminal since the last Z-total was printed. The stored
gures are not reset when a X-Total is printed.
NB: Performing X-Total does not perform reconciliation. Print-out of an X-Total will not reconcile the terminal.
Press MENU.
Main menu
5 Copy menu
6 Reconciliation
7 Operator menu
Press 7
or scroll down to Operator Menu and press OK.
Operator menu
1 Reports
2 Issuers
3 Term status
Press OK for Reports.
Reports
1 Trans. list
2 X-Total
3 Z-Total
Press 2
or scroll down to X-Total and press OK.
Print Pending Wait for report.
To Next Page
Loading...
