Ingenico iPP350 - Multiterminal; Multiple Merchants

Payment Terminals | Page 44 of 54
13. Multiterminal
Multiterminal makes it possible for up to ten dierent merchants to use the same payment terminal. Each merchant will have
their own account, receipt text and reports on the terminal. This is a solution that is suitable for e.g. companies sharing
premises.
13.1 Multiple Merchants
On terminals with multiple merchants, the correct merchant must be selected before the functions on the terminal can be
used.
To view a list of merchants on the display, press the MENU key or swipe/insert a card in the terminal. Use the arrow keys to
scroll to/mark the correct merchant, then press OK. Conrm that the correct merchant has been selected by pressing OK.
Follow the below instructions to select a merchant and perform a purchase:
Swipe the Merchant Card (with the magnetic stripe facing left).
Merchants
Multi 1
Multi 2
Multi 3
Scroll to the required merchant by using the arrow keys.
Multi 2
ID 01
TID 12345678
OK or STOP
Press OK to conrm. Or press Stop to go back to the list of merchants.
Main menu
1 Purchase
2 Purchase + cash
3 Card services
Press OK for purchase.
Amount + OK
100.00
Enter amount, then press OK.
Awaiting card
Chip up
Ask the customer to enter their bank card.
APPROVED Wait for receipt.