Intégration Guide_iUC150&iUC180 31/70 Copyright © 2012 Ingenico
900009816 R11 000 01/1223 All rights reserved
1.3.2.2 iUC150 output connectors description
1.3.2.2.1 USB device
The iUC150 contactless reader unit can be connected by type B USB.
1.3.2.2.2 Wake-up mechanism
iUC150 is design to save power thanks to a “stand-by mode”.
To wake-up iUC150 use Wake-up mechanism.
Pin 2 of COM0 link drive the wake-up mechanism.
Wake-up pin state
Hz (high impedance) Stand-by authorized
Drive to “0” Wake-up / Stand-by unauthorized
The Wake-up pin is drive to “0” by the one asking the wake-up.
It could be driven by iUC180 or iUC150 or any devices designed to be compliant
(Host device…).
COM 0 USB
To Next Page
Loading...
