Intégration Guide_iUP250&iUR250 33/83 Copyright © 2012 Ingenico
900009151 R11 000 01/1223 All rights reserved
2 MAIN ACCESSORIES
2.1.1 Generality
For a complete description of Ingenico Accessories, please refer to iUN accessories
catalog.
2.1.2 Optional PINPad-to-Reader USB cable
The interconnection between the iUR250 and iUP250 is done with a standard USB
cable.
An optional USB cable with short right-angle overmolded connectors can be
purchased as an accessory. This cable is designed to optimize the required volume
for iUR250 & iUP250 installation in the kiosk.
2.1.3 iUP250 Power supply
Ingenico power supply can be ordered under reference 192017549 (only for 0 to
40°C use)
Input: Main voltage supply ranging from 100V to 240V
Maximum current of 3A
Working frequency range between 47Hz and 63Hz
Output: Regulated DC voltage 12V
2.1.4 Stand-by management cable
Under definition, specification available on demand.
To Next Page
Loading...
