Ingenico iWL220 - Base Description; Technical Hardware Characteristics; Processor

Technical manual _iWL220/250
ICO_MKP_009_GU_EN_V4
16/60
Copyright © 2010 Ingenico
All rights reserved
2.2.2. Base description
Connector
Description
Terminal interface
USB link between Base and Terminal
Jack female ( 3,5 – 1,3mm)
PSU connector
USB-A (Host)
Host port
USB-B (Slave)
Slave port
RJ11
Up to 2 RS232 ports for serial links
RJ11
Dial-up Modem
RJ45
Ethernet 10/100 Base T
2.3. Technical hardware characteristics
2.3.1. Processor
Main CPU
RISC 32-bits ARM9 processor
Clock frequency
380 MHz
Capacity
450 MIPS
Ethernet Port
Power Jack
Cable management
USB B (Slave)
USB A (Host)
Highly resistant
connector
allowing 300k
dockings
Guiding areas
allowing a single
gesture docking
Modem &
RS232 ports
Cable
Management
cage
Connectors
door
Locking
keyhole
Anti-slip
bumpers