Ingenico iWL250 - Terminal Behavior; Battery Saver; Standby Mode; Backlighting Control

The battery (more...)
Indicator
Charge level
81 - 100% 61 - 80% 41 - 60% 21 - 40% 1 - 20%
Electrical
connection
Terminal behavior
Battery saver – There are two functions that extend battery life and thus provide greater autonomy:
• Standby mode – the terminal operates in an energy-saving mode. Standby mode is activated only when the
terminal is inactive (displays the home screen) and is not connected. To reactivate the terminal, simply press
the green key
. Note that a few seconds are needed after the terminal comes back from the standby mode
to detect the new cellular signal (refer yourself to the cellular signal icon).
• Backlighting control – the screen’s backlighting is turned off after a 15-second period of inactivity.
In the event of low battery (
) – A low battery is indicated by a blinking recharge indicator on the home screen.
At that moment it is important to connect the terminal to recharge the battery.
6
The terminal
Card
information
Initiating a
transaction
Tree-diagram
structure of
the menus
Description
of menus and
transactions
Considerations
for hotel and
rental industries
Back-up
measures
Additional
information