You should also consider the risk of theft, and ease of access for customers making
payments.
Changing Till Roll
1. Hold the terminal in one hand, with the screen facing you.
2. Use two fingers of the other hand to lift and release the printer cover.
3. Open it completely, and remove the used roll tube.
4. Loosen the end of the new roll, and place the roll into the printer chamber,
leaving a short length of paper hanging over the edge.
5. Close the printer cover firmly. It should lock on to the paper.
6.
Hold the Paper Feed key down to ensure that the roll feeds correctly.
Caring for your Terminal
Be careful to avoid spilling liquids on your terminal or base.
Clean it with a soft cloth. Do not use water, cleaning agents, or abrasive materials. Be
sure to turn off the terminal before cleaning.
The magnetic swipe and chip card readers should be cleaned regularly with a
suitable cleaning card.
3
valitor.com
To Next Page
Loading...
