ingenuity 12058 - Using the Swing Control Module; Swing Control Module Operation Overview

– 34 –
Touch the Power switch to power the Swing Control Module.
The Speed Selector function provides 6 speed settings and OFF.
The LEDs operate sequentially and in bar graph mode. To start
the swing function, touch the button until the flashing LED bar
graph displays the desired setting.
When you change the speed setting during swing motion,
the LED bar graph will flash for five seconds during the speed
adjustment. When the swing timer expires, the swing stops and
the Speed Selector and Timer LEDs turn OFF.
ENGLISH
Using the Swing Control Module
Power Switch
Nature Sounds/
Music
Volume Control
Swing Timer Select
Button and Indicator
Speed Selector Button
and Indicator