Ingersoll-Rand 326 Product Information

Ingersoll-Rand 326

12 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

45661329

Edition 2

May 2014

Save These Instructions

Product Information

EN

Product Information

Especicaciones del producto

Spécications du produit

ES

FR

Cut-O Air Tool

Model 326

Other manuals for Ingersoll-Rand 326

Operation And Maintenance Manual12 pages

Questions and Answers:

E
emily01Jul 28, 2025
Why Ingersoll-Rand Cutter losing power?
- J
  Jay Morris Jr.Jul 28, 2025
  If your Ingersoll-Rand Cutter experiences a loss of power, start by checking the air supply. Ensure the air pressure is at 90 psig (6.2 bar/620 kPa) at the tool's inlet for optimal performance. If the air supply is adequate, the power regulator may be clogged. Clean it using a suitable cleaning solution, and replace it if cleaning doesn't resolve the issue. Finally, a worn throttle valve could also be the cause; if so, replace the throttle valve.
C
Christopher AyalaAug 6, 2025
What to do if Ingersoll-Rand Cutter throttle valve is leaky?
- C
  Christopher MolinaAug 6, 2025
  If the throttle valve on your Ingersoll-Rand Cutter is leaking, it's likely due to a worn throttle valve. The suggested solution is to install a new throttle valve.
R
Roger ThomasAug 16, 2025
How to fix excessive runout on Ingersoll-Rand Cutter?
- E
  eric46Aug 17, 2025
  Excessive runout in your Ingersoll-Rand Cutter is likely caused by a bent arbor. The suggested solution is to replace the motor assembly.

Ingersoll-Rand 326 Specifications

General

Brand	Ingersoll-Rand
Model	326
Category	Cutter
Language	English

Related product manuals

Ingersoll-Rand 426