Close
Go
Back
Date
&
Time
This
screen
allows
the
user
set
date
and
time
as
follows:
Manual :
Manual
adjustment
of
date
and
time.x
Network
Time
Protocol
(NTP) :
Automatic
clock
synchronization
on
networking
protocol.
x
Manual
Do
the
following
to
manually
set
date
and
time:
Under Settings, select Manual.1.
From
the
Date
Format
field,
select
a
format
from
the
drop
down
list.2.
In
the
Set
Date
field,
select
to
choose
the
date
and
then
select
Done.3.
Under
Time
Format,
select
a
format.4.
In
Set
Time
field,
enter
hours
and
minutes.5.
For
12
Hrs
time
format,
select
AM/PM
button
to
update.a.
In
Set
Time
Zone
field,
select
a
time
zone
from
the
drop
down
list.\6.
NOTE : In a time zone that supports daylight savings, a
icon will be displayed next to Set
Time
Zone
field
indicating
that
DST
is
present.
Select
Save.7.
Network
Time
Protocol
Do
the
following
to
automatically
synchronize
date
and
time:
Under Settings, select NTP and then enter the IP address or host name of the NTP server.1.
From the Date Format field, select a format from the drop down list.2.
Under
Time
Format,
select
a
format.3.
In
Set
Time
Zone
field,
select
a
time
zone
from
the
drop
down
list.4.
NOTE :
In
a
time
zone
that
supports
daylight
savings,
a
icon
will
be
displayed
next
to
Set
Time
Zone
field
indicating
that
DST
is
present.
Select
Save.5.
Go
to
top
Close
To Next Page
Loading...
