Ingersoll-Rand INSIGHTqc - Page 80

For example:
If all job selection inputs are OFF, then the binary number will be 00000000,
that is, job 1 will be selected (0 + 1).
x
If job selection 1 is asserted and all other jobs are OFF, then the binary number
will be 00000001,that is, job 2 will be selected (1+1).
x
If job selection 2 is asserted and all other jobs are OFF, then the binary number
will be 00000010, that is, job 3 will be selected (2 + 1).
x
External - Binary - Field Bus: System will only allow job selection from the Fieldbus
inputs where the job selected is based on a binary representation of the 8 job selection
inputs.
x
Select Save.6.