To Next PageTo Next PageWhat to do if Ingersoll-Rand P425AWIR engine fails to start after 3 attempts?
If the Ingersoll-Rand Air Compressor engine fails to start after three attempts, it could be due to weak batteries. Check the machine batteries to ensure they are charged and capable of cranking the engine. Alternatively, a restricted fuel system component could be the cause. Inspect the machine's fuel system, including filters, fuel tank(s), and associated piping.
How to troubleshoot Ingersoll-Rand P425AWIR control panel if it doesn't turn on?
If the Ingersoll-Rand Air Compressor control panel key is in the 'ON' position but the WEDGE controller annunciator lamps and LED display do not come on, take these steps: * Check the F1 fuse. * Check the operation of the control panel switch. * Check the battery voltage and battery disconnect switch. * Ensure the external pressure switch contact is functioning. * Check the auto start harness connections. * Ensure the CAN bus is operational. * Check the TB1 connections. * Verify the operation of the Auto - Manual switch (S1).
Why Ingersoll-Rand P425AWIR lost communication with Auto Start controller?
If the Ingersoll-Rand Air Compressor has lost communication with the Auto Start controller, check the power to the Auto Start controller. Also, verify the J1939 CAN communication connections to the Auto Start controller.
General| Brand | Ingersoll-Rand |
|---|---|
| Model | P425AWIR |
| Category | Air Compressor |
| Language | English |
