Do you have a question about the Ingersoll-Rand Thermo King Cold Cube and is the answer not in the manual?
Brand | Ingersoll-Rand |
---|---|
Model | Thermo King Cold Cube |
Category | Refrigerator |
Language | English |
Explains symbols used in the manual for operator guidance.
Advises wearing safety glasses when working with the refrigeration system or battery.
Lists conditions for which Thermo King is not liable for damages.
Warns about electric shock hazards when using AC power supply.
Provides first aid instructions for contact with refrigerant (eyes, skin, inhalation).
Provides first aid instructions for contact with refrigerant oil (eyes, skin, inhalation, ingestion).
Lists the available Cold Cube models by gallon capacity and type (cooling/freezing).
Identifies the fuse holder and DC/AC connection sockets on the unit.
Instructions and cautions for connecting the unit to a DC battery.
Table specifying cable cross-section requirements based on length for 12V DC cooling models.
Table specifying cable cross-section requirements for freezing models and 242 gallon units.
Warns about ensuring correct polarity when connecting the battery.
Explains the unit's battery monitor for low voltage protection and its operation.
Lists the appropriate fuse ratings for different Cold Cube models.
Instructions and cautions for connecting the unit to an AC power supply.
Shows the components included in the optional remote display kit.
Illustrates the connection points on the unit's controller.
Shows how to properly tighten the bulkhead connector for the remote display.
Step-by-step guide for installing and configuring the remote display.
Provides initial setup and cleaning instructions before operating the unit for the first time.
Identifies and describes the function of the display elements on the control panel.
Step-by-step instructions on how to start and operate the Cold Cube.
Guide on how to adjust and set the desired cooling temperature.
Instructions on how to switch between Celsius (°C) and Fahrenheit (°F) temperature units.
Procedure for configuring high and low temperature alarm thresholds and delays.
Provides advice on how to use the Cold Cube efficiently.
Step-by-step guide on how to safely replace a blown fuse.
Recommends pre-cooling goods and explains the unit's design for maintaining temperature.
Instructions and cautions for cleaning and maintaining the Cold Cube unit.
Information on manual defrosting procedures when frost builds up.
Guide to diagnosing and resolving common operational problems based on LED flashes and error codes.