Disable the
hardware reset
button
Select to disable hardware reset button of the router
For configuring APN, username, password and other
parameters of the network providers across the world
Validity and order of imported configurations should be ensured. Acceptable configuration will
later be serially executed in order after system reboot. If the configuration files didn’t be
arranged according to effective order, the system won’t enter the desired state.
In order not to affect the operation of the current system, after performing an import
configuration and restore default configuration, please restart the device to make the new
configuration to take effect.
3.1.6 Scheduler
After this function is enabled, the device will reboot as the scheduled time. Scheduler function
will take effect after router sync time.
From the navigation tree, select “System >> Scheduler”, then enter “Scheduler” page.
Table 3-1-6 Parameters of Scheduler
Function description: set scheduler for system reboot
Enable/disable this function
Reboot the router everyday
Enable more detailed schedule rules, allow to set multiple
rules to reboot the router in specific time or interval.
Enable this feature will disable everyday reboot feature
above.
Router will reboot after dial up successfully, will not take
effort if this parameter is blank.
To Next Page
Loading...