27
router with highest priority becomes the gateway for the transmission task.
From navigation tree, select "Network >>VRRP" menu, then enter “VRRP” page.
Table 3-3-3 VRRP Parameters
Function description: Configure parameters of VRRP.
Click to enable VRRP function
Select ID of router group (range: 1-255)
Select a priority (range: 1-254)
20 (the larger the numerical
value, the higher the priority)
Set an advertisement interval.
Select "None" or Password type
None (a password is needed
when password type is
selected)
3.3.4 Device Manager
Device Management is a software platform to manage devices. The device can be managed and
operated via software platform when Device Management is started so that the Internet can be
in efficient operation. For instance, the operating status of device can be checked, device
software can be upgraded, device can be restarted, configuration parameters can be sent down
to device, and transmitting control or message query can be realized on device via Device
Manager.
Click the "Service>>Device Manager" menu in the navigation tree to enter the "Device Manager"
interface. It only support two modes, i.e. SMS and SMS + IP.
Table 3-3-4-1 Device Manager - Only SMS Parameters
Device Manager - Only SMS
Function description: Configuration of device manager functions can connect the router to the
device manager.
Set how long to check SMS.
Add trusted phone numbers and use comma to
To Next Page
Loading...
