InHand IR615-S Series - Page 47

41
RADIUS Server RADIUS Server
Enterprise
Branch
Dialling User
Enterprise
Headquarter
Mobile Office Staff
(L2TP Dialling Software)
L2TP Tunnel
L2TP Tunnel
From navigation tree, select VPN>>L2TP Client, enter "L2TP Client" and click <add>.
Table 3-6-4 Parameters of L2TP Client
3 L2TP Client
Function description: Configure parameters of L2TP client.
Parameters
Description
Default
Enable
Click to enable L2TP client
Disable
Tunnel Name
User defines tunnel name of L2TP client
L2TP_tunnel_1
L2TP Server
Set L2TP Server address
N/A
Username
Set server's username
N/A
Password
Set server's password
N/A
Server Name
Set server name
l2tpserver
Startup Modes
Select Auto Activated/Triggered by
Data/Passive/Manually
Activated/L2TPOverIPSec
Auto Activated
Authentication Method
Select CHAP/PAP
CHAP
Enable Challenge secrets
Click to enable challenge secrets
Disable
Challenge secret (after
enabling)
Set challenge secret
N/A
Local IP Address
Set local IP address
N/A
Remote IP Address
Set remote IP address
N/A
Remote Subnet
Set remote subnet address
N/A
Remote Netmask
Set remote subnet mask
255. 255.
255. 0
Link Detection Interval
Set link detection interval
60 s
Max. Retries for Link
Detection
Set the max. number of retries
5
Enable NAT
Click to enable NAT
Disable
MTU
Set max. transmission unit
1500
MRU
Set max. receiving unit
1500
Enable Debug
Enable debug mode.
Disable