InHand IR720 series - Page 106

106
15.3.4 Reboot the Router
Enter the reboot command and press Enter. After confirmation, the router will reboot.
15.3.5 Display the Version Information of Router Software
Enter the show version command and press Enter.
15.3.6 Display the Router’s Current Configuration Information
Enter the show running-config command and press Enter.
15.3.7 Display MAC Address Table
Enter the show mac address-table command and press Enter.
15.3.8 Network Connectivity Test
Enter the command of address or name of the host to be detected by ping and press Enter.