InHand IR720 series - Introduction of Operation of; Exit the Web Setting Page

17
4.3 Introduction of Operation of Page List
The page similar to that in Figure 4-2 often occurs in the router's Web setting page, and its
operation is uniformly introduced in this section and will no longer be repeated.
Table 4-2 Introduction of Page List Operation
Interface Items
Description
You can click the button <Add> to add a new entry in the
pop-up dialog box.
You can select the specified list item and click the button
<Modify> to modify the list item.
You can select the specified list item and click the button
<Delete> to delete the list item.
4.4 Exit the Web Setting Page
Click at the upper right corner of the web interface and confirm to exit the Web setting
page.
Check box is used to enable (checked) and disable
(unchecked) the function or service.
Drop-down list box is used to select the appropriate
list item.
When you have finished the setting items of a page,
you need to click on the button <apply and save > on
this page to validate the setting and save the
configuration.
You can click the button <Refresh> to manually
update the page setting data;
You can also select refresh rate and the page data will
automatically update at the refresh rate.