InHand IR720 series - Dynamic Routing Protocols (RIP;OSPF)

59
The meanings of key items in the page are shown in the table below.
9.2 Dynamic Routing
The routing table entry on dynamic router is obtained in accordance with certain algorithm
optimization through the information exchange between the connected routers, while the routing
information is continuously updating in certain time slot so as to adapt to the continuously changing
network and obtain the optimized pathfinding effects at any time. In order to achieve efficient
pathfinding of IP packet, IETF has developed a variety of pathfinding protocols, including Open
Shortest Path First (OSPF) and Routing Information Protocol (RIP) for Autonomous System (AS)
interior gateway protocol. The so-called autonomous system refers to the collection of hosts, routers
and other network devices under the management of the same entity (e.g. schools, businesses, or
ISP)
9.2.1 Routing status
Page Wizard: Routing →Dynamic Routing →Routing Status
Static routing setting
Key Items
Description
Destination address
Enter the destination IP address need to be reached
Subnet Mask
Enter the subnet mask of destination address need to be reached
Interface
Output interface
Gateway
IP address of the next router to be passed by before the input data
reaches the destination address
S/N
Match with the cellular interface, tunnel
interface ID, vlan ID
Distance
Priority, smaller value contributes to higher priority