9.8 SNMP
9.8.1 SNMP
Currently, the SNMP Agent of VG814 supports SNMPv1, SNMPv2c, and SNMPv3.
● SNMPv1 and SNMPv2c use community names for authentication.
● SNMPv3 uses user names and passwords for authentication.
Method for enabling SNMP for VG814:
Click "Administration >> SNMP >> SNMP", check "Enable", select "v1c" for "v2c" for
"SNMP Version", and click Apply & Save.
If v3c is selected, the corresponding user and user group need to be configured.
Enter any name for "Groupname", select a security level, and click Add. Enter any
name for "Username", select the new group name for "Groupname", set
"Authentication" and "Authentication password", click Add, and then click Apply &
Save.
To Next Page
Loading...