This document provides instructions for setting up and using the 07340 notebook mouse. The mouse is a wireless peripheral designed for use with a laptop or computer, offering a portable and cable-free alternative to a built-in trackpad or wired mouse. Its primary function is to provide precise cursor control and navigation on a computer screen.

Function Description:

The 07340 notebook mouse operates wirelessly, communicating with a computer via a small USB receiver. This receiver plugs into an available USB port on the computer, establishing a connection that allows the mouse to transmit its movements and clicks. The mouse is powered by batteries, which are inserted into a compartment on its underside. Once connected and powered, the mouse enables users to move the cursor, select items, click buttons, and perform other standard mouse functions. The wireless design enhances portability and reduces cable clutter, making it suitable for mobile computing environments.

Usage Features:

The setup process for the 07340 notebook mouse is straightforward, involving several key steps:

Battery Installation:
- To begin, the mouse needs to be powered. This involves turning the mouse upside-down to locate the battery compartment.
- A battery-release latch is present on the underside of the mouse. This latch must be pressed towards the center of the mouse to release and open the battery cover.
- Once the cover is open, batteries can be inserted. The battery compartment has molded polarity indicators (+) and (-) to guide correct insertion. It is crucial to ensure the batteries are placed in the correct orientation to ensure the mouse functions properly.
- After inserting the batteries, they should be pressed firmly into their place to ensure a snug fit.
- Finally, the battery cover is reinstalled by pressing the latch towards the center of the mouse and securing the cover back into position.
USB Receiver Connection:
- The wireless functionality of the mouse relies on a USB receiver. This small dongle needs to be inserted into an available USB port on the computer. The receiver is typically small and designed to be unobtrusive once plugged in.
Pairing the Mouse and Receiver:
- After the batteries are installed and the USB receiver is plugged in, the mouse and receiver need to be paired to establish a wireless connection.
- First, locate a small, round button on the top of the USB receiver. This button should be momentarily pressed and released; it's important not to hold it down. Upon pressing, a light on the receiver should begin to blink, indicating it's in pairing mode.
- Next, turn the mouse upside-down again. On the bottom side of the mouse, there is a small, round red button. This button is the pairing button for the mouse.
- Press this little round red button. Depending on the design, a pen or a straightened paper clip might be necessary to press this button, as it can be recessed. Similar to the receiver button, this button should be pressed momentarily and released immediately, not held down.
- Upon successful pairing, a red light on the bottom of the mouse should flicker off and then back on, confirming that the connection has been established. At this point, the mouse is ready for use.

Maintenance Features:

The primary maintenance for the 07340 notebook mouse involves battery replacement. When the mouse stops responding or its performance degrades, it's an indication that the batteries need to be replaced. The process for battery replacement is identical to the initial battery installation: open the battery compartment, remove the old batteries, insert new ones with correct polarity, and close the cover.

The wireless nature of the mouse means there are no cables to manage or maintain, reducing potential points of failure associated with wired connections. Keeping the USB receiver free from dust and ensuring it is securely plugged into the USB port will help maintain a reliable connection.

For troubleshooting or further assistance, the document provides an email contact, indicating that support is available for suggestions, comments, errors found, or additional information. This suggests a level of post-purchase support for users encountering issues or having questions about the device.

Inland 07340 - Inserting Batteries