LED Indicators:
• Power: Lights up when Power-on (Red)
• ACT (Disk Activity): Blinks during CF card read/write activity (Green)
• CF1 (Card Detect): Lights up when a CF card is inserted to the Master CF socket (Yellow)
• CF2 (Card Detect): Lights up when a CF card is inserted to the Slave CF socket (Yellow)
Bottom side:
IDE connector:
Please note the correct polarity when connecting the IDE connector, PIN1 is shown in the lower left side as follows:
All specifications and information are subject to change without prior notice
All logos and trademarks referenced are the registered trademark of their respective owners
To Previous Page
Loading...
Need help?
General