Jumbo Remote Upgrade Installation Instructions
Before you attempt to disassemble your Jumbo remote
Control, please be aware that the upgrade is specific
to the Innovage Jumbo Remote, shown in Fig.5 below. If
your board is different, there is no guarantee that the
board and software will work.
You should have the proper tools in order to do the
installation. These include:
1. Plastic Prytool for tablets or mobile phones
sometimes referred to a spudger.
Fig.1 Plastic Prytool
This tool will allow you to open the remote without
damaging the tabs and marking the shell.
To Next Page
Need help?
General
