Need help?Do you have a question about the Innovate Motorsports XD-16 and is the answer not in the manual?
General| Brand | Innovate Motorsports |
|---|---|
| Model | XD-16 |
| Category | Monitor |
| Language | English |
Explains the function of analog LEDs, function indicators, numeric display, light sensor, control button, and record indicator.
Lists all cables, mounting hardware, and software provided with the XD-16 kit for installation and use.
Explains special displays like Sensor Warm-up, Heater Calibration, Free Air Calibration, and Normal Operation for AFR/Lambda.
Details operations for the Control button: starting/stopping recording, clearing memory, and initiating free air calibration.
Instructions for installing LM Programmer software, LogWorks, and other essential tools from the included CD.
Explains how to correctly program input channels in LogWorks for XD-16 recognition and use.
Details the physical connection steps required to link the XD-16 to a computer using provided cables.
Provides instructions for updating XD-16 firmware and explains the recovery mechanism for firmware upgrade failures.
Guides selection of input channels, display type (AFR/Lambda), and configuration of analog LED ranges via LM Programmer.
Details how to configure Min/Max hold features, including setting dependencies and persistence times for stored values.
Explains how to set up warning and alarm conditions, which can be dependent on multiple channels and time durations.
Instructions on customizing the colors of the analog 'needle' LEDs using the LM Programmer software's color tab.
Step-by-step instructions for disassembling the XD-16, replacing the gauge face, and reassembling the unit.
Guides users on creating custom labels for the gauge face, recommending materials and tools for customization.
Illustrates the correct order of components when assembling the XD-16 with a custom foil face.
To Next Page