To Next PageTo Next Page
Need help?Do you have a question about the Innovative Energies No-Break SR250i 485 Series and is the answer not in the manual?
General| Brand | Innovative Energies |
|---|---|
| Model | No-Break SR250i 485 Series |
| Category | UPS |
| Language | English |
Covers general safety, hazardous voltages, earth leakage, ventilation, and water/dust precautions.
Discusses EMI, fuse ratings, and connection polarity for proper installation.
Provides definitions for technical terms used in the manual.
Illustrates the internal components and data flow of the No-Break™ system.
Details the ECB's behavior under overload and short-circuit conditions.
Describes normal operation, slight overload, and severe overload conditions.
Covers system behavior during mains power failure and low battery conditions.
Details states like battery missing and severe overload during mains failure.
Explains the meaning of front panel LED states and flash codes.
Outlines the conditions under which the ECB is activated.
Lists the main capabilities and benefits of the SR250i.
Details input/output voltages, current limits, efficiency, and regulation.
Covers operating temperature, humidity, safety standards, and cooling.
Presents different model numbers, output voltages, and current ratings.
Specifies unit size, weight, and rack mounting options.
Describes available communication interfaces and optional features.
Provides a visual guide for wiring the unit and its accessories.
Step-by-step instructions for powering up and testing the system.
Explains the status of front panel LEDs for power, battery, and alarms.
Details rear panel connections, alarm relays, and contact types.
Describes specific alarm triggers like mains failure, low battery, and reverse polarity.
Lists factory default values for output voltage, battery thresholds, and charge limits.
Explains how the BCT function is enabled, its duration, and retry options.
Details how to reset the system after a failed battery condition test.
Guides users through installing the Power MBLink software from the provided disk.
Instructions for setting up communication ports and parameters for the converter.
Steps to obtain hardware and firmware details from the protocol converter.
How to view real-time power supply voltage, current, and temperature via Modbus.
Using the software to control and monitor the battery condition test function.
Accessing and understanding the power supply's configurable settings and diagnostic data.
Lists real-time data points available from the PSU via the converter.
Details available alarm signals and command functions for system control.
Provides detailed measurements and diagrams for the SR250 power supply unit.
Shows the physical size and dimensions of the protocol converter.
Outlines the warranty period and conditions for Innovative Energies power supplies.
Provides phone numbers, email, and postal addresses for customer support.
