Why does my Innovo Thermometer show a battery symbol when I turn it on?
If the Innovo Thermometer displays a battery symbol upon powering on, it indicates that the battery level is low. To resolve this, replace the batteries with new ones of the same model and specifications.
How to fix Innovo INV-EF100 Thermometer that won't turn on?
If your Innovo Thermometer fails to power on, here are a few things to check: * First, the battery level might be extremely low. Try using new batteries of the same model. * Second, make sure the batteries are installed correctly, paying attention to the polarity symbols in the battery compartment. Reversed polarities can prevent the thermometer from turning on. * Third, if the issue persists and the thermometer is still under warranty, it may be faulty, and you should contact the manufacturer.
Why is my Innovo INV-EF100 giving a low reading?
If your Innovo Thermometer gives a temperature reading lower than the typical body temperature range, it could be due to a few reasons: 1. The infrared sensor might be dirty. Clean it gently with a cotton swab moistened with alcohol, ensuring the sensor surface is reflective and gleaming. 2. The thermometer probe may not be correctly aligned. Reposition it to align properly with the eardrum. 3. If the thermometer was recently in a cold environment, wait 30 minutes before taking another temperature reading.
What to do if my Innovo INV-EF100 displays 'Er1'?
General| Brand | Innovo |
|---|---|
| Model | INV-EF100 |
| Category | Thermometer |
| Language | English |
Highlights ease of operation, portability, and ergonomic design for user convenience.
Emphasizes utilization of advanced infrared technology for precise and rapid measurements.
Describes the thermometer's construction (ABS/TPR plastics, no mercury) and material safety (BPA/latex-free).
Allows recalling the last 20 temperature readings to track historical data.
Alerts users to potential fever with audible beeps and visual cues on the LCD screen.
Details how to clean the sensitive sensor lens using rubbing alcohol and a cotton swab.
Explains how to clean the thermometer's exterior and display with a soft cloth.
Provides guidance on ensuring accurate readings, starting with a clean probe.
Explains LCD display, operational steps, and feedback for forehead and ear measurements.
Details how to access and review stored temperature readings in the device's memory.
Instructions for switching temperature units (°C/°F) and interpreting error codes.
Advises on electromagnetic interference precautions and proper disposal of the device and batteries.
Addresses issues where the thermometer does not turn on, covering battery and fault causes.
Explains the meaning of the battery symbol appearing on the display.
Guides users on resolving the "Er1" error, often related to ambient temperature.
Provides solutions for readings lower than expected, including sensor cleaning and probe alignment.
Offers solutions for readings higher than normal, especially when no fever is present.
Specifies the model number and relevant industry standards and regulations met by the device.
Details the available temperature units (°F/°C) and the device's measurement range.
Outlines the laboratory accuracy specifications and compliance with ASTM standards.
Specifies the display resolution and the time delay for readings.
Explains various abnormal state displays like "L", "H", "Er1", "ErC".
Covers sound output levels, automatic shutdown timing, and low-voltage warning indicators.
Details memory function capacity, power consumption metrics, and LED backlit specifications.
Specifies the environmental conditions required for operation and safe storage.
Information on the type of batteries used and their expected lifespan.
Defines the formula and acceptable error margin for clinical accuracy testing.
To Next Page
