Inovance AM500 Series - Power Supply Specifications; Input Specifications

‑19‑
Item Specification
Rated bus output voltage 5 VDC (4.75 VDC to 5.25 VDC)
Rated bus output current 2A (max@5 V)
24 V input power supply protection Protection against short circuit and reverse
connection
Hot swap Not supported
1.3.3 Input Specifications
Item Specification
Input type Digital input
Number of input channels 8
Input mode Sink/Source
Input voltage class 24 VDC±10% (21.6 VDC to 26.4 VDC)
High‑speed
input
(X0‑X7)
Input current at input ON ＞4 mA
Input current at input OFF ＜2.5 mA
Hardware response time 2 μs (RC time)
Max. input frequency 200kHz
Input impedance 3.4 k
ON voltage ≥15 VDC
OFF voltage ≤5 VDC
Software filter time
● Low speed: 2 ms to 1000 ms
● High speed: 100 ns to 100 μs
Isolation mode Isolated by digital isolator chip
Common terminal 8‑point/common terminal (The polarity +/‑ of
input power supply is changeable.)
1.3.4 Output Specifications
Item Specification
Output type Transistor NPN
Number of output channels 8