4
◆
Do not use this product as a warning device that may cause serious personal injuries,
equipment damages, or system shutdown. Use independent hardware and/or mechanical
interlocks to design important alarm indications and the control/triggering equipment.
During Installation
◆
Install this product correctly, and use this product indoors. Ensure that the usage environment
meets the requirements described in the Basic Parameters section.
◆
Do not install the product in the environment with strong magnetic eld, direct sunlight, high
temperature, ammable gas, steam, or dust; otherwise, explosions may be caused.
◆
Do not use this product in the environment where the temperature may change drastically or
the humidity is high; otherwise, condensation inside the device may be caused to damage the
device.
◆
Make sure that all cable connectors are securely connected to the product. If the connection is
loose, wrong input or output signals may be generated.
◆
Install this product within the storage temperature range recommended in this guide;
otherwise, the LCD screen may fail.
During Wiring
◆
Before installation, wiring, and other operations, cut o all power supplies. Never wire cables
and plug in and out of the connectors in a live state. Otherwise, electric shock or circuit damage
may be caused.
◆
Connect the DC power supply to the dedicated terminals as described in this guide.
◆
During screw hole processing and wiring, avoid malfunctions, electronic component damages,
or res.
◆
After the wiring is completed, check carefully to ensure that the working voltage and the
position of the wiring terminal are correct. Otherwise, a re or an accident may be caused.
To Next Page
Loading...