Inovance H3U Series - Page 214

213
4
4 Instructions 4.5.5 Other Data Processing
ANS: Annunciator setting
◆
Overview
When driving conditions are met, the ANS instruction starts the timer in S. When the timer completes its
cycle K, the selected annunciator ag (D) is set.
ANS S K D
Annunciator
setting
Applicable model:
H3U
S Timer T Timer T for annunciator setting
16-bit instruction
(7 steps)
ANS: Continuous
execution
m Timing cycle Timing cycle of timer T
D
Annunciator
ag
Annunciator ag, in the range S900 to S999
◆
Operands
Operand
Bit Element Word Element
System·User System·User Bit Designation Indexed Address Constant
Real
Number
S X Y M T C S SM D R T C SD KnX KnY KnM KnS KnSM
V,Z
Modication K H E
m X Y M T C S SM D R T C SD KnX KnY KnM KnS KnSM
V,Z
Modication K H E
D X Y M T C S SM D R T C SD KnX KnY KnM KnS KnSM
V,Z
Modication K H E
Note: The elements in gray background are supported.
◆
Function
The ANS instruction is used for annunciator driving.
The value in S ranges from T0 to T199, and the value in D ranges from S900 to S999.
Example:
X1
X2
〔ANS T0 K10 S900〕
S Dm
If X1 and X2 are connected simultaneously for more than 1s, S900 is set. Even if X1 or X2 switches to OFF
later, S900 remains active (but T0 is reset and its value changes to 0). If the connection duration is less
than 1s, the timer is reset when X1 or X2 switches to OFF.
If M8049 (annunciator effectiveness) is preset to ON, the number of the lowest active (ON) annunciator in
the range S900 to S999 is stored in D8049. When any annunciator in the same range is set ON, M8048
(annunciator action) is set to ON.
Note: The following table lists related elements.
Element Name Description
M8049
Annunciator
effectiveness
When M8049 = ON, D8049 and M8049 take effect.
M8048
Annunciator
action
When M8049 = ON and any annunciator in the range S900 to S999 is ON,
M8048 is set to ON.
D8049
Number of the
lowest active
(ON) annunciator
Stores the number of the lowest active annunciator in the range S900 to
S999.