Inovance H3U Series - Chapter 2 Pre-Programming Precautions

26
2
2 Pre-programming Precautions2.1 Programming Software
Chapter 2 Pre-programming Precautions
2.1 Programming Software
The H3U series PLC uses AutoShop V2.50 or later versions. The minimum conguration of AutoShop is as
follows:
Operating system: Windows XP, Windows 7, Windows 8, or Windows 10
Memory: 1 GB or above
Hard disk: 1 GB or above available space
CPU: Intel i3 or later versions or AMD-equivalent CPUs
You can download AutoShop from the website www.inovance.cn.
2.2 Communication Cable
The commercially available RS232-Mini DIN8 plug cable dedicated for PLC project downloading or the
Mini USB download cable can be used for user project download, commissioning, monitoring, and HMI
connection.
If the computer does not have the DB9 RS232 serial port, the USB-Mini DIN8 dedicated download cable
can also be used.
2.3 Introduction to AutoShop
1) Project creating
Choose
File
>
New Project
. The following dialog box is displayed.
Enter the relevant information as prompted, and click
OK
. A new H3U project is created.