Inovance H3U Series - Page 28

27
2
2 Pre-programming Precautions
2.3 Introduction to AutoShop
2) Project input
AutoShop supports three programming languages: instruction list, ladder chart, and SFC. The ladder chart
is the default programming language. The following describes how to input an instruction in ladder chart
mode:
a) Click an instruction icon on the toolbar, and the
Application Instruction
window is displayed.
Add an instruction to the current position.
b) Select an instruction in
Instruction Set
in the
Project Manager
window.
● Drag the instruction to the window and add it to the current position through the
Application
Instruction
window.
● Double-click the instruction, and the
Application Instruction
window is displayed. Add an instruction
to the current position.
c) Select an instruction in
Ladder Chart
in the menu, and open the
Application Instruction
window to add the instruction to the current position.
d) If you are familiar with application instructions, you can use a keyboard to manually input a
project.
3) Project compiling
a) Use the shortcut buttons for project compiling. The rst button is used to compile
the current project. The second button is used to compile all projects.
b) Choose
PLC
>
Compile/Compile All
for compiling.
c) If no error is prompted during project compiling, the project can be downloaded.