Inovance H3U Series - Combined Instructions

57
4
4 Instructions 4.1.2 Combined Instructions
BORI: ORI bit contact of bit data
◆
Overview
The execution result (ON or OFF) of the BORI instruction is determined based on the status (ON or OFF) of the
designated bit of the source data (node B connected to another node in parallel).
BORI S n
ORI bit contact of
bit data
Applicable model:
H3U
S Source
data
Element number of the source data 16-bit instruction
(5 steps)
BORI: Continuous
execution
32-bit instruction
(9 steps)
DBORI: Continuous
execution
n Loaded bit Designated loaded bit; value range: 0 to 15 (16-bit
instruction) or 0 to 31 (32-bit instruction)
◆
Operands
Operand
Bit Element Word Element
System·User System·User Bit Designation Indexed Address Constant
Real
Number
S X Y M T C S SM D R T C SD KnX KnY KnM KnS KnSM
V,Z
Modication K H E
n X Y M T C S SM D R T C SD KnX KnY KnM KnS KnSM
V,Z
Modication K H E
Note: The elements in gray background are supported.
◆
Application
4.1.2 Combined Instructions
Combined instructions
ANB Serial connection of circuit blocks
ORB Parallel connection of circuit blocks
MPS Stack-based storage
MRD Stack read (ow pointer unchanged)
MPP Stack read
MEP
Flow edge control, generate falling/rising edge pulse for
operation results
MEF