Inovance H3U Series - Digital Output Module (AM600-0016 ETN AM600-0016 ETP, and AM600- 0016 ER)

664
10
10 Extension Modules 10.2.3 Digital Output Module (AM600-0016ETN, AM600-0016ETP, and AM600- 0016ER)
10.2.3 Digital Output Module (AM600-0016ETN, AM600-0016ETP, and
AM600- 0016ER)
(1) Specications
●
Digital transistor output modules
Item AM600-0016ETP AM600-0016ETN
Output channel 16 16
Output connecting mode 18-point wiring terminal 18-point wiring terminal
Output type Transistor, high-side output Transistor, low-side output
Output mode SOURCE SINK
Supply voltage 24 VDC (–15% to +20%)
Output voltage class 12 to 24 V (–5% to +20%)
OFF max. leakage current 0.5 mA below
ON response time 0.5 ms below (hardware response time)
OFF response time 0.5 ms below (hardware response time)
Max. load
Resistive
load
0.5 A/point, 2 A/common
Inductive
load
12 W/24 VDC (total)
Lamp load 2W/24 VDC (total)
Isolation method Opto-couplers isolation
Output action display Output indicator ON when opto-coupler driving is applied
Short circuit-proof output
Yes (The current is limited to 1 to
1.7 A when short circuit protection
is applied.)
None
●
Digital relay output module
Item AM600-0016ER
Output channel 16
Output connecting mode 16+2 (COM) point wiring terminals
Power supply of the module
[1]
24 VDC (–15% to +20%)
Output type Relay output
Output mode -
Voltage of the output control
circuit
110 to 220 VAC
Rated current of relay 240 VAC/24 VDC, 2 A
OFF max. leakage current -
ON response time 20 ms below (hardware response time)
OFF response time 20 ms below (hardware response time)
Max. load
Resistive load Single-point 1 A/point
Lamp load Single-point 30 W
Inductive load 220 VAC, 2 A/1 point
Capacitive load Not recommended