Inovance H3U Series - Page 682

681
10
10 Extension Modules 10.3.1 AM600RTU-COP Remote Extension Module
(3) Addition of the CANopen device
① Add the AM600RTU-COP CANopen device.
Choose
CANopen device list
>
Inovance
and double-click
AM600RTU-COP
or use the left mouse button
to drag it to the pane on the right. The AM600RTU-COP communication module is automatically connected
to the H3U.
② Congure the extension module.
After AM600RTU-COP is added, congure the hardware of the digital or analog extension module
connected to AM600RTU-COP.
Right-click the communication module to be congured and choose
Open the hardware program
from the
context menu. The module conguration interface is displayed.
Add the corresponding digital or analog extension module to the network node rack based on the actual
module usage condition.