A.3 M8000 Flag and D8000 Register
709
Appendix
M
Element
Description
D
Element
Description
M8063
PLC
communication
error
OFF RUN D8063 PLC communication error code
M8064
Parameter
error
Blinking STOP D8064 Parameter error code
M8065 Syntax error Blinking STOP D8065 Syntax error code
M8066 Circuit error Blinking STOP D8066 Circuit error code
M8067 Operation error OFF RUN D8067 Operation error code
M8068
Operation error
latch
OFF RUN D8068
Step number of the latched program with an
operation error
M8069 System error ag, set to ON D8069 M8065-M8067 error step numbers
Parallel connection (1:1)
M8070 Reserved D8070
Duration of incorrect parallel connection, 500 ms by
default
M8071 Reserved D8071 Reserved
M8072 ON during parallel connection D8072 Reserved
M8073
Incorrect M8070/M8071 setting for parallel
connection
D8073 Reserved
High-speed input and counting
M8074 Reserved D8074 Reserved
M8075 Reserved D8075 Reserved
M8076 Driver I56□ (X6 pulse) interrupt disabling D8076 Reserved
M8077 Driver I57□ (X7 pulse) interrupt disabling D8077 Reserved
M8078 Reserved D8078 Reserved
M8079 Reserved D8079 Reserved
M8080 X0 pulse capture enabling D8080 Reserved
M8081 X1 pulse capture enabling D8081 Reserved
M8082 X2 pulse capture enabling D8082 Reserved
M8083 X3 pulse capture enabling D8083 Reserved
M8084 X4 pulse capture enabling D8084 Reserved
M8085 X5 pulse capture enabling D8085 Reserved
M8086 X6 pulse capture enabling D8086 Reserved
M8087 X7 pulse capture enabling D8087 Reserved
M8088 Reserved D8088 Reserved
M8089 Reserved D8089 Reserved
M8090 Flag of X0 pulse captured D8090 Reserved
M8091 Flag of X1 pulse captured D8091 Reserved
M8092 Flag of X2 pulse captured D8092 Reserved
M8093 Flag of X3 pulse captured D8093 Reserved
M8094 Flag of X4 pulse captured D8094 Reserved
M8095 Flag of X5 pulse captured D8095 Reserved
M8096 Flag of X6 pulse captured D8096 Reserved
M8097 Flag of X7 pulse captured D8097 Reserved
M8098 Reserved D8098 Reserved
M8099 High-speed ring counter started D8099 [0 to 32,767] rising action ring counter (0.1 ms)
M8100 Reserved D8100 Board program version, 24xxx
M8101 Reserved D8101
Auxiliary board program version, 0xBxxx, in
hexadecimal format
To Next Page
Loading...
