Inovance IS580 Series - Page 112

Chapter 9 Function Code Table IS580 User Manual
- 110 -
Function
Code
Name LED Display Setting Range Min. Unit Default Property
A4-09
Long-time running
protective time of
reverse pressure relief
Long-time running
protective time of
reverse pressure relief
0.001s to 5.000s 0.001s 0.000s
☆
A4-10 Injection S-curve rise
time
Injection S-curve rise
time
0.001s to 1.000s 0.001s 0.030s
☆
A4-11 Injection S-curve fall
time
Injection S-curve fall
time
0.001s to 1.000s 0.001s 0.030s
☆
A4-12 Injection ow rise slope Injection ow rise slope 0s to 5.000s 0.001s 0.100s
☆
A4-13 Injection ow fall slope Injection ow fall slope 0s to 5.000s 0.001s 0.100s
☆
A4-14 Oil pressure reference
rise time
Oil pressure reference
rise time
0s to 2.000s 0.001s 0.020s
☆
A4-15 Oil pressure reference
fall time
Oil pressure reference
fall time
0s to 2.000s 0.001s 0.020s
☆
A4-16 Injection overshoot
suppression detection
level
Injection overshoot
suppression detection
level
0 to 2000 1 200
☆
A4-17 Injection overshoot
suppression coefcient
Injection overshoot
suppression coefcient
0s to 3.000s 0.001s 0.050s
☆
A4-18 Reserved - - - -
☆
A4-19 Reserved - - - -
☆
A4-20 Reserved - - - -
☆
A4-21 Reserved - - - -
☆
A4-22 Oil pressure deviation
of oil pressure
suppression disabled
Oil pressure deviation of
oil pressure suppression
disabled
0.0 kg/cm
2
to A3-02 0.1 kg/cm
2
10.0 kg/
cm
2
☆
A4-23 Max. value of integral
limit deviation
Max. value of integral
limit deviation
0.0 kg/cm
2
to A3-02 0.1 kg/cm
2
25.0 kg/
cm
2
☆
A4-24 Integral limit mode
selection
Integral limit mode
selection
0, 1 1 0
☆
A4-25 Pressure loop output
upper limit
Pressure loop output
upper limit
0 to 50.0 0.1s 2.0
☆
A4-26 Oil pressure PID
algorithm selection
Oil pressure PID
algorithm selection
0 to 2 1 0
★
A4-27 Reserved - - - -
☆
Group F0: Standard Parameters
F0-00 Model display Model display 1: G type (heavy load)
2: Reserved
1 Model
dependent
●
F0-01 Control mode Control mode 0: Reserved
1: Closed-loop vector
control (CLVC)
2: V/F control
1 1
★