Inovance MD200 - Quick Setup Guide; Setup Flowchart and Parameters

4 Quick Setup
- 22 -
4 Quick Setup
4.1 Setup Flowchart
START Para. Parameter Name Default Commission
Before power on
Install and cable the drive
.
Install and cable the drive as explained in chapters 1 to 3 of the MD200 AC Drives User
Manual.
Check wirings
.
-
of power supply and AC drive
outputs
Restore parameters
.
FP-01 Parameter initialization 0
0: No operation
01: Restore default settings except motor parameters
02: Clear records including errors
03: Reserved
04: Back up parameters
05 to 19: Reserved
20: Mechanical movement industry (conveying belt)
21: Inertia industry (fan)
22 to 500: Reserved
501: Restore user’s backup parameters
NOTE: It is recommended to "Restore default settings" prior to commissioning the AC
drive.
CONTINUE Para. Parameter Name Default Commission