Inovance MD200 - Monitoring Parameters

5 Parameter Table
- 51 -
Para. No. Para. Name Setting Range Default Comms. Address
AA-08
SVC magnetic eld open loop
control low speed current
30% to 150% 100 0xAA08/0x4A08
AA-09
Open loop control switchover
frequency
2.0 to 100.0 Hz 4.0 Hz 0xAA07/0x4A07
AA-10
Open loop control deceleration
speed uctuation coefcient
0 to 6 3 0xAA0A/0x4A0A
AA-11
Open loop control acceleration/
deceleration time
0.1 to 1000.0s 50.0s 0xAA0B/0x4A0B
AA-12
Resistance identication upon
startup
0: Disabled
1: Enabled
0 0xAA0C/0x4A0C
AA-13
Stator resistance coefcient 1
identication before startup
0 to 65535
Auto-tuning
parameter
0xAA0D/0x4A0D
AA-14
Stator resistance coefcient 2
identication before startup
0 to 65535
Auto-tuning
parameter
0xAA0E/0x4A0E
AA-15
Stator resistance coefcient 3
identication before startup
0 to 65535
Auto-tuning
parameter
0xAA0F/0x4A0F
Group AC: AI/AO Correction
AC-00 AI measured voltage 1 -10.00 to 10.000 V 350.0 V 0xAC00/0x4C00
AC-01 AI displayed voltage 1 -10.00 to 10.000 V
Factory-
corrected
0xAC01/0x4C01
AC-02 AI measured voltage 2 -10.00 to 10.000 V
Factory-
corrected
0xAC02/0x4C02
AC-03 AI displayed voltage 2 -10.00 to 10.000 V
Factory-
corrected
0xAC03/0x4C03
AC-12 AO target voltage 1 -10.00 to 10.000 V
Factory-
corrected
0xAC0C/0x4C0C
AC-13 AO measured voltage 1 -10.00 to 10.000 V
Factory-
corrected
0xAC0D/0x4C0D
AC-14 AO target voltage 2 -10.00 to 10.000 V
Factory-
corrected
0xAC0E/0x4C0E
AC-15 AO measured voltage 2 -10.00 to 10.000 V
Factory-
corrected
0xAC0F/0x4C0F
Note: Parameters in groups A1 and A5 are not displayed by default. They can be displayed by setting FP-02.
Group AE: AI/AO Manufacturer Correction Value
AE-00 AI1 measured voltage 1 -9.999 to 4.000 V 2.000 V 0xAE00/0x4E00
AE-01 AI1 sampled voltage 1 -9.999 to 4.000 V 2.000 V 0xAE01/0x4E01
AE-02 AI1 measured voltage 2 -9.999 to 9.999 V 8.000 V 0xAE02/0x4E02
AE-03 AI1 sampled voltage 2 -9.999 to 9.999 V 8.000 V 0xAE03/0x4E03
AE-12 AO1 ideal voltage 1 0.500 to 4.000 V 2.000 V 0xAE0C/0x4E0C
AE-13 AO1 measured voltage 1 0.500 to 4.000 V 2.000 V 0xAE0D/0x4E0D
AE-14 AO1 ideal voltage 2 6.000 to 9.999 V 8.000 V 0xAE0E/0x4E0E
AE-15 AO1 measured voltage 2 6.000 to 9.999 V 8.000 V 0xAE0E/0x4E0E