Inovance MD380-5T5.5GB - Page 23

Product Information MD380 User Manual
- 22 -
Item
6SHFL¿FDWLRQV
Individualized
functions
Multi-motor
switchover
)RXUPRWRUVFDQEHVZLWFKHGRYHUYLDIRXUJURXSVRIPRWRU
parameters.
Multiple
communication
protocols
,WVXSSRUWVFRPPXQLFDWLRQYLD0RGEXV578352),%86
DP, CANlink and CANopen.
Motor overheat
protection
The optional I/O extension card enables AI3 to receive the
motor temperature sensor input (PT100, PT1000) so as to
realize motor overheat protection.
Multiple encoder
types
It supports various encoders such as differential encoder,
open-collector encoder, resolver, UVW encoder, and SIN/
COS encoder.
User
programmable
function
The optional programming card helps you to realize
secondary development. Its programming environment is
compatible with that of the PLC of Inovance.
Advanced
background
software
It supports the operation of AC drive parameters and virtual
oscillograph function, via which the state inside the AC drive
is monitored.
RUN
Running
command source
 Operation panel
 Control terminals
 Serial communication port
You can perform switchover between these sources in
various ways.
)requency source
There are a total of 10 frequency sources, such as digital
setting, analog voltage setting, analog current setting, pulse
setting and serial communication port setting.
You can perform switchover between these sources in
various ways.
Auxiliary
frequency source
There are ten auxiliary frequency sources. It can implement
¿QHWXQLQJRIDX[LOLDU\IUHTXHQF\DQGIUHTXHQF\V\QWKHVLV
Input terminal
Standard:
5 digital input (DI) terminals, one of which supports up to
100 kHz high-speed pulse input
2 analog input (AI) terminals, one of which only supports
0–10 V voltage input and the other supports 0–10 V voltage
input or 4–20 mA current input
Expanding capacity:
5 DI terminals
1 AI terminal that supports -10–10 V voltage input and also
supports PT100\PT1000
efesotomasyon.com